Cabinet Refacing & Doors In Redbank Plains

Cabinet Refacing & Doors Experts

Custom kitchens, wardrobes and joinery for Ipswich - designed, built and installed with over 12 years of local experience

Ipswich Custom Cabinets refaces existing kitchens and replaces cabinet doors and drawer fronts across the district, giving a tired kitchen a new look without a full rebuild. If your carcasses are sound, we can replace the doors, drawer fronts, panels and handles, re-cover exposed end panels and update the benchtop, keeping the layout and cutting the cost and disruption of a complete renovation. New fronts are made in your choice of two-pac polyurethane, timber veneer, laminate or profiled Shaker styles that suit Ipswich's heritage Queenslanders and character cottages. We fit branded Blum or Hettich soft-close hinges and, where needed, upgrade to full-extension runners around 40kg. Wet-area cabinets are checked for moisture damage and rebuilt in 16-18mm HMR board where required, because humid subtropical summers, with Amberley near a 31°C January maximum, are hard on older carcasses. We are fully insured to $20 million public liability, with more than 12 years in local cabinetry. Call 0485 032 128 for a free assessment.

GET A FREE QUOTE

Full Name *

Phone *

Short message about your needs *

I agree to terms & conditions provided by the company. By providing my phone number, I agree to receive text messages from the business.

0485 032 128

Ipswich Custom Cabinets

Refacing and Door Options We Offer

Refacing covers a spectrum, and we scope it to what your kitchen actually needs. At the lightest end we replace just the doors and drawer fronts and swap the handles, an instant visual refresh where the boxes, benchtop and layout are fine. A fuller reface adds new exposed end panels, re-covered or replaced kickboards, a fresh benchtop and splashback, and a hardware upgrade to soft-close hinges and runners, so the kitchen looks and works like new while the sound carcasses stay in place. We also do door-only replacement for homeowners who simply want to change a style or colour, and drawer-front replacement where fronts have worn or a vinyl wrap has peeled near the oven. Door styles span flat slab fronts for a modern look, profiled and Shaker doors that suit the district's Federation homes, Queenslanders and workers' cottages, and shaped or routed profiles for a more traditional kitchen. Finishes include two-pac polyurethane for a durable painted surface, timber veneer for natural grain, high-pressure laminate for value and hard wear, and we advise caution with vinyl-wrap near heat. Beyond kitchens, we reface bathroom vanities, laundry cabinetry and built-in robes on the same principle. Part of every reface is an honest assessment: we open up the cabinets, check the carcasses, hinges and any water damage, and tell you plainly whether refacing is the smart call or whether a section has deteriorated enough to warrant rebuilding. Where a sink base or a floor cabinet in a wet zone has swollen, we rebuild that unit in moisture-resistant board rather than reface a failing box. The goal is to spend your money where it changes the look and keep the sound structure you already own.

Ipswich Custom Cabinets

How We Reface for Ipswich Homes

Refacing only makes sense if the existing carcasses are genuinely sound, so our method starts with inspection. We check the boxes for square, the hinges and runners for wear, and the wet-area units for the swelling and delamination that Ipswich's humid subtropical climate encourages; with Amberley recording a January mean maximum near 31°C and muggy conditions from November to April, older non-moisture-resistant sink bases are a common casualty. Where a carcass is failing we rebuild it in 16-18mm HMR moisture-resistant board with heat-sealed edges and sealed cut-outs so the reface lasts, and in flood-aware riverside streets we can add removable kickboards so a base can be dried and salvaged, noting honestly that moisture-resistant board resists water but is not waterproof. New doors and fronts are made to measure for your openings, not trimmed from stock sizes, and hung on Blum or Hettich soft-close hinges rated beyond 100,000 open-and-close cycles with three-way adjustment, which lets us align every door and even out reveals to within about 2mm even on the settled, out-of-square walls of a century-old Queenslander. Where drawers are tired we fit full-extension runners around 40kg, stepping up to 70kg-class runners under a cooktop. Exposed end panels and fillers are re-covered or replaced to match the new fronts, and benchtops, if being changed, are replaced in compliant materials: laminate, natural granite or porcelain via licensed stonemasons, or timber, never banned engineered stone. Finish chemistry matters on the fronts you touch daily, so we favour two-pac polyurethane for a hard, washable painted surface and caution against vinyl-wrap immediately beside ovens. Because refacing keeps the existing boxes, most jobs are finished in a fraction of the time of a full rebuild, with far less mess in an occupied home.

Ipswich Custom Cabinets

Why Ipswich Homeowners Reface With Us

Refacing is especially popular in Ipswich because of the housing mix. The city, proclaimed a municipality in 1860 and grown on coal and the railway workshops, has a large stock of Queenslanders, Federation homes and post-war brick houses in suburbs like Booval, Bundamba, Raceview and Brassall, many with solid older kitchens whose carcasses are fine but whose doors and benchtops look dated. For owner-occupiers in these established, value-conscious suburbs, refacing delivers a new-kitchen look for a fraction of a full renovation, which suits both budgets and the character of a heritage home. In the newer Springfield and Ripley growth corridors, refacing appeals to families updating a builder-grade kitchen a decade on without the cost of a rebuild. We serve both by assessing honestly and quoting only what the kitchen needs. As a single accountable local team we do the inspection, make the fronts and carry out the install ourselves, so nothing is lost between a salesperson and a subcontractor, and we can advise on the spot whether a reface or a rebuild is the better spend. We carry $20 million public liability insurance and bring more than 12 years of local cabinetry experience, and we work cleanly in occupied kitchens with dust control and daily clean-downs, since most refaces happen with the family still living around the work. A large share of our reface jobs come from referrals and repeat clients across the district, which for work judged on finish and honesty is the endorsement we value most. If refacing is not right for your kitchen, we will tell you before you spend a cent.

Ipswich Custom Cabinets

What Refacing Costs in Ipswich

Refacing almost always costs less than a full kitchen rebuild, which is much of its appeal, but the exact figure depends on the number of doors and drawers, the finish and whether the benchtop and hardware are included; treat these as indicative ranges, with a firm price after a measure. A door-and-drawer-front replacement with new handles on a typical kitchen commonly runs somewhere around $3,000 to $8,000, depending on the door count and finish, with two-pac and timber sitting above laminate. A fuller reface adding new end panels, a laminate benchtop, splashback and a soft-close hardware upgrade more often lands between $8,000 and $18,000. Where a stone or porcelain benchtop via licensed stonemasons is included, the benchtop lifts the total accordingly. By comparison, a full custom kitchen with all-new cabinetry generally starts well above these figures, so refacing can save a substantial sum where the carcasses are sound. The main cost levers are door style and finish, the number of drawers, whether the benchtop is being replaced and in what material, and any wet-area boxes that need rebuilding in moisture-resistant board rather than refacing. We quote itemised so you can see doors, benchtop, hardware and any rebuilds separately and decide what to include. Because we build the fronts and install them ourselves, there is no subcontractor margin on top. We will also be straight with you: if too many carcasses are water-damaged, refacing becomes false economy, and we will recommend rebuilding the affected runs instead so you are not paying to dress up a failing box.

Ipswich Custom Cabinets

Refacing vs Full Replacement vs Flat-Pack

There are three realistic paths for a tired Ipswich kitchen, and the right one depends on the state of your carcasses. Refacing keeps sound existing boxes and renews the doors, fronts, hardware and benchtop, which is the fastest and least disruptive route and typically the cheapest, ideal where the structure is fine but the look is dated. A full custom rebuild replaces everything and is the answer where carcasses are water-damaged, the layout needs changing, or you want to reconfigure a closed heritage kitchen into open-plan. Flat-pack is the third path: IKEA Logan is only around a 40 to 42km, 34-minute drive and Bunnings carries Kaboodle locally, so a low-cost DIY replacement is available, but it means tearing out serviceable boxes, wrestling fixed-size modules into out-of-square heritage walls, and self-managing the benchtop and install. Refacing sidesteps all of that where it applies: we reuse the boxes you already own, make the new fronts to your exact openings, and keep the benchtop selection compliant, never banned engineered stone. It is not always the right call, and we will say so; if your sink base is swollen and half the carcasses are failing, dressing them up is throwing money away and a rebuild is the honest recommendation. But for the many Ipswich kitchens with solid boxes and dated fronts, refacing by one accountable local team delivers most of the visual gain of a new kitchen at a fraction of the cost and mess. Call 0485 032 128 for a free assessment and we will tell you which path genuinely suits your kitchen. Ipswich Custom Cabinets is fully insured and just a call away on +61485032128 for a free quote.

Related Concreting Services

Home Office Cabinets in Redbank Plains

Custom home offices for Ipswich remote and hybrid workers: ergonomic fitted desks, smart storage and cable-managed workstations built to your room and your body. Single, twin or full study-wall setups, timber or two-pac finishes. Made to measure, not flat-pack. Call 0485 032 128.

Built-in Wardrobes in Redbank Plains

Built-in wardrobes scribed to fit Ipswich bedrooms, from settled heritage Queenslanders to new estate homes. Sliding or hinged doors, fully fitted interiors with soft-close drawers, and finishes to match your room. Locally made and fully insured. Call 0485 032 128 for a quote.

Custom Storage Solutions in Redbank Plains

Made-to-measure storage for Ipswich homes: butler's pantries, walk-in robes, laundry towers, garage systems and under-stair joinery. Built from moisture-resistant board with soft-close hardware, scribed to heritage walls or squared to new-estate slabs. Fully insured, 12-plus years local.

TESTIMONIALS

What Our Cabinet Refacing & Doors Customers Say About Us

The Process

3 Step Process For Your Cabinet Refacing & Doors Needs

Consult and Measure On-Site

It starts with a visit, not a phone estimate. We come to your Ipswich home, measure the space precisely, check how square the walls are, and talk through how you use the room. For heritage homes we note where cabinetry will need scribing, and for flood-aware streets we discuss salvageable base detailing before anything is drawn.

Design and Firm Quote

We turn your measurements and ideas into a design, then help you choose door finishes, compliant benchtops and hardware to suit your budget. You receive a firm written quote based on your actual space and materials, with no obligation to proceed and no surprise costs once the job is locked in.

Build and Install

Your cabinetry is built square in our workshop from quality moisture-resistant board and soft-close hardware, then installed on site: scribed, packed level and adjusted so reveals sit within about 2mm. Benchtops are templated and fitted once the cabinets are in, and we leave the site clean with everything working.

Cabinet Refacing & Doors In Redbank Plains

FREQUENTLY ASKED QUESTIONS

Everything you need to know about our Cabinet Refacing & Doors In Redbank Plains

How do I know if my kitchen can be refaced?

The test is whether the carcasses are sound. We open the cabinets and check the boxes for square and water damage, the hinges and runners for wear, and the wet-area units for the swelling that Ipswich humidity causes. If the structure is good, refacing is usually the smart call. If key boxes have failed, we will tell you before you commit and recommend rebuilding those runs instead.

How much cheaper is refacing than a new kitchen?

Refacing almost always costs well under a full custom rebuild because you keep the existing cabinetry and pay only for new fronts, hardware and any benchtop. The exact saving depends on your door count, finish and whether the benchtop is replaced, but for a kitchen with sound boxes it commonly saves a substantial share of a full renovation.

Can you match a heritage or Shaker door style?

Yes. We make profiled and Shaker doors that suit the district's Queenslanders, Federation homes and workers' cottages, as well as flat modern slab fronts, in two-pac polyurethane, timber veneer or laminate. Doors are made to your exact openings and hung on soft-close hinges adjusted to sit true on older, out-of-square walls.

Will you replace the benchtop as part of a reface?

We can. A benchtop change is a common part of a fuller reface, and we fit compliant surfaces only: laminate, natural granite or porcelain via licensed stonemasons, or timber. We do not supply banned engineered stone. You can also reface doors and fronts alone and keep an existing benchtop if it is still in good order.

How long does refacing take?

Because the existing boxes stay in place, most refaces are completed in a fraction of the time of a full rebuild, often within days once the new fronts are made rather than weeks. There is also far less mess and disruption, which matters when the family is living around the kitchen while we work.

What if some of my cabinets are water-damaged?

We rebuild the affected units in 16-18mm HMR moisture-resistant board with sealed edges rather than dressing up a failing box, and blend the new carcass into the reface so it matches. If too many cabinets have deteriorated, we will be honest that a full rebuild is the better value and say so before you spend on refacing.